Troubleshooting Novelty Candles
The problems you may experience with novelty candles are usually related to problems with the
candle molds. The following is a troubleshooting guide for
novelty candles and candle molds that may be of some help when things go wrong.
The Candle won't Release or Stuck to Mold
Possible Causes:
- the candle wax was poured too hot
- lack of a candle mold release agent
Possible Solutions:
- reduce the pour temperature of the candle wax
- use kemamide release powder (do not use silicone spray in plastic or rubber candle molds)
Candle Mold Deteriorating
Possible Causes:
- use of candle scent
- use of silicone spray
Possible Solutions:
- do not use candle scents
- do not use silicone spray; only use kemamide release additive
- use miracle seal to plug small holes in the candle mold
Candle Mold is Stained
Possible Causes:
Possible Solutions:
- use un-dyed candle wax in plastic and rubber candle molds, and over-dip the candle for color
Candle Mold Leaks - (Plastic)
Possible Causes:
- the candle mold is not sealed properly
- there are holes in the candle mold
Possible Solutions:
- use masking tape, candle mold clamps, and candle mold base to seal the candle mold
- use miracle seal to plug small holes in the candle mold
Do click on the Troubleshooting Pillar Candles link to check the other
problems you may experience with candle molds.